Anesket Dosage

Rating: 5 - 1 review(s)
How times a day do you take this medicine?
sponsored

Dosage of Anesket in details

The dose of a drug and dosage of the drug are two different terminologies. Dose is defined as the quantity or amount of medicine given by the doctor or taken by the patient at a given period. Dosage is the regimen prescribed by the doctor about how many days and how many times per day the drug is to be taken in specified dose by the patient. The dose is expressed in mg for tablets or gm, micro gm sometimes, ml for syrups or drops for kids syrups. The dose is not fixed for a drug for all conditions, and it changes according to the condition or a disease. It also changes on the age of the patient.
sponsored

Note: Barbiturates and Anesket hydrochloride, being chemically incompatible because of precipitate formation, should not be injected from the same syringe.

If the Anesket hydrochloride dose is augmented with diazepam, the two drugs must be given separately. Do not mix Anesket hydrochloride and diazepam in syringe or infusion flask. For additional information on the use of diazepam, refer to the WARNINGS and DOSAGE AND ADMINISTRATION Sections of the diazepam insert.

Preoperative Preparations

  1. While vomiting has been reported following Anesket hydrochloride administration, some airway protection may be afforded because of active laryngeal-pharyngeal reflexes. However, since aspiration may occur with Anesket hydrochloride and since protective reflexes may also be diminished by supplementary anesthetics and muscle relaxants, the possibility of aspiration must be considered. Anesket hydrochloride is recommended for use in the patient whose stomach is not empty when, in the judgment of the practitioner, the benefits of the drug outweigh the possible risks.
  2. Atropine, scopolamine, or another drying agent should be given at an appropriate interval prior to induction.

Onset And Duration

Because of rapid induction following the initial intravenous injection, the patient should be in a supported position during administration.

The onset of action of Anesket hydrochloride is rapid; an intravenous dose of 2 mg/kg (1 mg/lb) of body weight usually produces surgical anesthesia within 30 seconds after injection, with the anesthetic effect usually lasting five to ten minutes. If a longer effect is desired, additional increments can be administered intravenously or intramuscularly to maintain anesthesia without producing significant cumulative effects.

Intramuscular doses, in a range of 9 to 13 mg/kg (4 to 6 mg/lb) usually produce surgical anesthesia within 3 to 4 minutes following injection, with the anesthetic effect usually lasting 12 to 25 minutes.

Dosage

As with other general anesthetic agents, the individual response to Anesket hydrochloride is somewhat varied depending on the dose, route of administration, and age of patient, so that dosage recommendation cannot be absolutely fixed. The drug should be titrated against the patient's requirements.

Induction

Intravenous Route

The initial dose of Anesket hydrochloride administered intravenously may range from 1 mg/kg to 4.5 mg/kg (0.5 to 2 mg/lb). The average amount required to produce five to ten minutes of surgical anesthesia has been 2 mg/kg (1 mg/lb).

Alternatively, in adult patients an induction dose of 1 mg to 2 mg/kg intravenous Anesket at a rate of 0.5 mg/kg/min may be used for induction of anesthesia. In addition, diazepam in 2 mg to 5 mg doses, administered in a separate syringe over 60 seconds, may be used. In most cases, 15 mg of intravenous diazepam or less will suffice. The incidence of psychological manifestations during emergence, particularly dream-like observations and emergence delirium, may be reduced by this induction dosage program.

Note: The 100 mg/mL concentration of Anesket hydrochloride should not be injected intravenously without proper dilution. It is recommended the drug be diluted with an equal volume of either Sterile Water for injection, USP, Normal Saline, or 5% Dextrose in Water.

Rate of Administration

It is recommended that Anesket hydrochloride be administered slowly (over a period of 60 seconds). More rapid administration may result in respiratory depression and enhanced pressor response.

Intramuscular Route

The initial dose of Anesket hydrochloride administered intramuscularly may range from 6.5 to 13 mg/kg (3 to 6 mg/lb). A dose of 10 mg/kg (5 mg/lb) will usually produce 12 to 25 minutes of surgical anesthesia.

Maintenance Of Anesthesia

The maintenance dose should be adjusted according to the patient's anesthetic needs and whether an additional anesthetic agent is employed.

Increments of one-half to the full induction dose may be repeated as needed for maintenance of anesthesia. However, it should be noted that purposeless and tonic-clonic movements of extremities may occur during the course of anesthesia. These movements do not imply a light plane and are not indicative of the need for additional doses of the anesthetic.

It should be recognized that the larger the total dose of Anesket hydrochloride administered, the longer will be the time to complete recovery.

Adult patients induced with Anesket hydrochloride augmented with intravenous diazepam may be maintained on Anesket hydrochloride given by slow microdrip infusion technique at a dose of 0.1 to 0.5 mg/minute, augmented with diazepam 2 to 5 mg administered intravenously as needed. In many cases 20 mg or less of intravenous diazepam total for combined induction and maintenance will suffice. However, slightly more diazepam may be required depending on the nature and duration of the operation, physical status of the patient, and other factors. The incidence of psychological manifestations during emergence, particularly dream-like observations and emergence delirium, may be reduced by this maintenance dosage program.

Dilution

To prepare a dilute solution containing 1 mg of Anesket per mL, aseptically transfer 10 mL from a 50 mg per mL vial or 5 mL from a 100 mg per mL vial to 500 mL of 5% Dextrose Injection, USP or Sodium Chloride (0.9%) Injection, USP (Normal Saline) and mix well. The resultant solution will contain 1 mg of Anesket per mL.

The fluid requirements of the patient and duration of anesthesia must be considered when selecting the appropriate dilution of Anesket hydrochloride injection. If fluid restriction is required, Anesket hydrochloride injection can be added to a 250 mL infusion as described above to provide a Anesket hydrochloride concentration of 2 mg/mL. Anesket hydrochloride injection 10 mg/mL vials are not recommended for dilution.

Supplementary Agents

Anesket hydrochloride is clinically compatible with the commonly used general and local anesthetic agents when an adequate respiratory exchange is maintained.

The regimen of a reduced dose of Anesket hydrochloride supplemented with diazepam can be used to produce balanced anesthesia by combination with other agents such as nitrous oxide and oxygen.

How supplied

Anesket hydrochloride injection is supplied as the hydrochloride in concentrations equivalent to Anesket base.

NDC 42023-137-10 - Each 20-mL multi-dose vial contains 10 mg/mL. Supplied in cartons of 10.

NDC 42023-138-10 - Each 10-mL multi-dose vial contains 50 mg/mL. Supplied in cartons of 10.

NDC 42023-139-10 - Each 5-mL multi-dose vial contains 100 mg/mL. Supplied in cartons of 10.

Store between 20° to 25°C (68° to 77°F).

Protect from light.

Manufactured and Distributed by: JHP Pharmaceuticals, LLC, Rochester, MI 48307. Revised: Feb 2013

What other drugs will affect Anesket?

Tell your doctor about all other medicines you use, especially:

If you are using any of these drugs, it may take you longer to recover from anesthesia with Anesket.

This list is not complete and other drugs may interact with Anesket. Tell your doctor about all medications you use. This includes prescription, over-the-counter, vitamin, and herbal products. Do not start a new medication without telling your doctor.

Anesket interactions

Interactions are the effects that happen when the drug is taken along with the food or when taken with other medications. Suppose if you are taking a drug Anesket, it may have interactions with specific foods and specific medications. It will not interact with all foods and medications. The interactions vary from drug to drug. You need to be aware of interactions of the medicine you take. Most medications may interact with alcohol, tobacco, so be cautious.
sponsored

Prolonged recovery time may occur if barbiturates and/or narcotics are used concurrently with Anesket.

Anesket is chemically incompatible with barbiturates and diazepam because of precipitate formation. Therefore, these should not be mixed in the same syringe or infusion fluid.

Anesket may potentiate the neuromuscular-blocking effects of atracurium and tubocurarine including respiratory depression with apnoea.

The use of halogenated anaesthetics concomitantly with Anesket can lengthen the elimination half-life of Anesket and delay recovery from anaesthesia. Concurrent use of Anesket (especially in high doses or when rapidly administered) with halogenated anaesthetics can increase the risk of developing bradycardia, hypotension or decreased cardiac output.

The use of Anesket with other CNS depressants (eg, ethanol, phenothiazines, sedating H1-blockers or skeletal muscle relaxants) can potentiate CNS depression and/or increase risk of developing respiratory depression. Reduced doses of Anesket may be required with concurrent administration of other anxiolytics, sedatives and hypnotics.

Anesket has been reported to antagonise the hypnotic effect of thiopental.

Patients taking thyroid hormones have an increased risk of developing hypertension and tachycardia when given Anesket.

Concomitant use of antihypertensive agents and Anesket increases the risk of developing hypotension.

When Anesket and theophylline are given concurrently, a clinically significant reduction in the seizure threshold is observed. Unpredictable extensor-type seizures have been reported with concurrent administration of these agents.

Incompatibilities: Anesket is chemically incompatible with barbiturates and diazepam because of precipitate formation. Therefore, these should not be mixed in the same syringe or infusion fluid.


sponsored

References

  1. MeSH. "Analgesics". https://www.ncbi.nlm.nih.gov/mesh/68... (accessed September 17, 2018).
  2. European Chemicals Agency - ECHA. "Ketamine: The information provided here is aggregated from the "Notified classification and labelling" from ECHA's C&L Inventory. ". https://echa.europa.eu/information-o... (accessed September 17, 2018).
  3. PubMed Health. "Ketamine (By injection) (Ketalar): This section provide the link out information of drugs collectetd in PubMed Health. ". http://www.ncbi.nlm.nih.gov/pubmedhe... (accessed September 17, 2018).

Reviews

The results of a survey conducted on ndrugs.com for Anesket are given in detail below. The results of the survey conducted are based on the impressions and views of the website users and consumers taking Anesket. We implore you to kindly base your medical condition or therapeutic choices on the result or test conducted by a physician or licensed medical practitioners.

User reports

3 consumers reported frequency of use

How frequently do I need to take Anesket?
It was reported by ndrugs.com website users that Anesket should ideally be taken Once in a day as the most common frequency of the Anesket. You should you adhere strictly to the instructions and guidelines provided by your doctor on how frequently this Anesket should be taken. Get another patient's view on how frequent the capsule should be used by clicking here.
Users%
Once in a day3
100.0%


12 consumers reported doses

What doses of Anesket drug you have used?
The drug can be in various doses. Most anti-diabetic, anti-hypertensive drugs, pain killers, or antibiotics are in different low and high doses and prescribed by the doctors depending on the severity and demand of the condition suffered by the patient. In our reports, ndrugs.com website users used these doses of Anesket drug in following percentages. Very few drugs come in a fixed dose or a single dose. Common conditions, like fever, have almost the same doses, e.g., [acetaminophen, 500mg] of drug used by the patient, even though it is available in various doses.
Users%
501mg-1g6
50.0%
6-10mg2
16.7%
51-100mg2
16.7%
11-50mg1
8.3%
1-5mg1
8.3%


Consumer reviews


There are no reviews yet. Be the first to write one!


Your name: 
Email: 
Spam protection:  < Type 28 here

Information checked by Dr. Sachin Kumar, MD Pharmacology

| Privacy Policy
This site does not supply any medicines. It contains prices for information purposes only.
© 2003 - 2022 ndrugs.com All Rights Reserved